EMF Meter Accessories
Calibration Certificate – ME3851A/ME3951A
Factory Calibration Certificate with Data – Available for the ME3851A and ME3951A.
Each unit is individually verified for calibration compliance and is rigoursly compared to highly accurate traceable test equipment. This calibration is performed in a controlled area in the manufacturer’s facility. The calibration certificate will contain the serial number of the unit, the date the testing occurred and data gathered during the process.
The calibration process is time sensitive. The meters are individually calibrated at the time of your order. Please allow 2 – 3 weeks for delivery. Re-Calibration is recommended every 1 – 2 years if the instrument is heavily used or used for important tasks.
Note that all Gigahertz equipment goes through a basic testing protocol as it comes off the assembly line. This calibration certificate is an additional verification of the meters’ accuracy
EMF Meter Case CC1
Ensure your EMF Meters (EMF Analyzers / EMF Analysers or EMF Detectors) and Equipment are Protected During Transport. Add a Hard Plastic Carrying Case Compatible with either the ME3030B, ME3830B or ME3840B EMF Meters by Gigahertz Solutions.
Protect your EMF Meter (EMF Analyzer / EMF Analyser or EMF Detector) Investment with a Rigid Hard cover Plastic Carrying Case
Size Interior Dimensions: (L x W x H) (10.25″ L x 7″ W x 2″ H) or (26cm L x 18cm W x 5cm H)
Know for sure what RF levels you are being exposed to… Buy a Gigahertz Solutions Meter
Hard Shell Zipper Travel Case - HS1
A Hard Shell Zipper Case. Compatible with: ME3030B, ME3830B,ME3840B, ME3851A, ME3951A, Acousticom 2, PF5 Pocket EMF Detector, Cornet ED88TPlus.
Hard Shell Zipper Travel Case:
- Interior Dimensions: 18cm x 8cm x 3cm
- Exterior Dimensions: 20cm x 10cm x 4cm
Supplied with:
- Hard Shell Zipper Travel Case: Qty=1
Hard Shell Zipper Travel Case - HS2
Protect your EMF/RF Meter with a Hard Shell Zipper Case. Compatible with: Acoustimeter AM-10, UHS2 AC Gaussmeter, OFC-1 Pulsed Optical Frequency Counter, ME3851A Kit, ME3951A Kit
- Interior Dimensions: L=20cm x W=10cm x H=6cm
- Exterior Dimensions: L=22cm x W=12cm x H=7cm
PM1 – NFA EMF Meter Holder
Fiberglass Holder Used for Potential Free or Ungrounded AC Electric Field Measurements – Compatible with all NFA Series EMF Meters
When using the meter without a ground (Potential free) a conductive material near by like a mattress coil will interfere with the meter. The meter gives 4 inches of space for a more accurate measurement.
Adding the PM1 to your EMF measurement arsenal will:
- Allow for accurate uninfluenced potential free (ungrounded) AC Electric Field measurements in sleeping areas
- Increase the speed, accuracy and efficiency of EMF assessments
- Ensure secure placement with a clearly visible view of the display
The PM1 Measuring Holder is made of non-conductive, durable fiberglass material.
Know for sure what EMF levels you are being exposed to… Buy a Gigahertz Solutions Meter
PM5 – ME Mounting Bracket
When using the meter without a ground (Potential free) the conductive human body will interfere with the meter. Use a non-conductive rod to create a distance of 3 to 5 feet.
Attach the PM5s mounting bracket to a non-conductive pole to aid with potential free measurements.
Compatible with the ME3030B, ME3830B, ME3840B, ME3851A, ME3951A EMF Meters.
- A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields
- Can easily be mounted to a non-conductive rod not included (e.g. wooden dowel, fiberglass rod)
- Made of non-conductive material
- Non-conductive screw with a convenient handle, specially designed for the use with the ME3030B, ME3830B, ME3840B, ME3851A, ME3951A EMF Meters
Know for sure what EMF levels you are being exposed to… Buy a Gigahertz Solutions Meter
PM5s – NFA Mounting Bracket
When using the meter without a ground (Potential free) the conductive human body will interfere with the meter. Use a non-conductive rod to create a distance of 3 to 5 feet.
Attach the PM5s mounting bracket to a non-conductive pole to aid with potential free measurements.
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields
- Can easily be mounted to a non-conductive rod not included (e.g. wooden dowel, fiberglass rod)
- Made of non-conductive material
- Non-conductive screw with a convenient handle, specially designed for the use with the NFA1000 and the NFA400
- For highest precision please use the PM1
Know for sure what EMF levels you are being exposed to… Buy a Gigahertz Solutions Meter
Protective Cover – NFACover1
Protect Equipment Investments with a Flexible soft cover – Compatible with All NFA Series EMF Meters (Yellow in Colour).
Add Some Polish to Your EMF Tool Kit
The Protective Cover is Designed To:
- Custom fit any NFA series Gigahertz Solutions Meter
- Improve grip
- Protect your EMF Meter from rough handling, bumps and minor drops
Made From Durable Silicone
- Available in yellow
- Supplied with the NFA1000
Know for Sure What EMF Levels you are Being Exposed to… Buy a Gigahertz Solutions Meter
Gigahertz Solutions Transport Case
- Transport case with 2 shaped foam filler inserts for Gigahertz Solutions meters
- Dimensions: approx. 33 x 27 x 8 cm
- Fits one or two devices (with small antenna)
Attenuator 100x for HF35C
This attenuator allows the measurement of heavy exposures. Useful for making measurements close to sources of radio frequency emission, for example 10-100 meters from a cell tower or 1 meter from a wireless router or smartphone.
- Suited for Gigahertz Solutions HF35C.
- Attenuates the signal by a factor 100.
- Increases the maximum range of the HF35C to 200.000 microwatts per square meter.
How to use
Mount the attenuator on the antenna input socket of the HF35C. Then connect the antenna cable to the attenuator. Multiply the measured value on the display by 100.
