EMF Meter Accessories

Calibration Certificate – ME3851A/ME3951A

Factory Calibration Certificate with Data – Available for the ME3851A and ME3951A.

Each unit is individually verified for calibration compliance and is rigoursly compared to highly accurate traceable test equipment. This calibration is performed in a controlled area in the manufacturer’s facility. The calibration certificate will contain the serial number of the unit, the date the testing occurred and data gathered during the process.

The calibration process is time sensitive. The meters are individually calibrated at the time of your order. Please allow 2 – 3 weeks for delivery. Re-Calibration is recommended every 1 – 2 years if the instrument is heavily used or used for important tasks.

Note that all Gigahertz equipment goes through a basic testing protocol as it comes off the assembly line. This calibration certificate is an additional verification of the meters’ accuracy

EMF Meter Case CC1

Ensure your EMF Meters (EMF Analyzers / EMF Analysers or EMF Detectors) and Equipment are Protected During Transport. Add a Hard Plastic Carrying Case Compatible with either the ME3030B, ME3830B or ME3840B EMF Meters by Gigahertz Solutions.

Protect your EMF Meter (EMF Analyzer / EMF Analyser or EMF Detector) Investment with a Rigid Hard cover Plastic Carrying Case

Size Interior Dimensions:  (L x W x H)  (10.25″ L x 7″ W x 2″ H)  or  (26cm L x 18cm W x 5cm H)

Know for sure what RF levels you are being exposed to… Buy a Gigahertz Solutions Meter

Hard Shell Zipper Travel Case - HS1

A Hard Shell Zipper Case.  Compatible with: ME3030B, ME3830B,ME3840B, ME3851A, ME3951A, Acousticom 2, PF5 Pocket EMF Detector, Cornet ED88TPlus.

Hard Shell Zipper Travel Case:

  • Interior Dimensions: 18cm x 8cm x 3cm
  • Exterior Dimensions: 20cm x 10cm x 4cm

Supplied with:

  • Hard Shell Zipper Travel Case: Qty=1

Hard Shell Zipper Travel Case - HS2

Protect your EMF/RF Meter with a Hard Shell Zipper Case.  Compatible with: Acoustimeter AM-10, UHS2 AC Gaussmeter, OFC-1 Pulsed Optical Frequency Counter, ME3851A Kit, ME3951A Kit

  • Interior Dimensions: L=20cm x W=10cm x H=6cm
  • Exterior Dimensions: L=22cm x W=12cm x H=7cm

PM1 – NFA EMF Meter Holder

Fiberglass Holder Used for Potential Free or Ungrounded AC Electric Field Measurements – Compatible with all NFA Series EMF Meters

When using the meter without a ground (Potential free) a conductive material near by like a mattress coil will interfere with the meter.  The meter gives 4 inches of space for a more accurate measurement.


Adding the PM1 to your EMF measurement arsenal will:

  • Allow for  accurate uninfluenced  potential free (ungrounded) AC Electric Field measurements in sleeping areas
  • Increase the speed, accuracy and efficiency of EMF assessments
  • Ensure secure placement with a clearly visible view of the display


The PM1 Measuring Holder is made of non-conductive, durable fiberglass material.

Know for sure what EMF levels you are being exposed to… Buy a Gigahertz Solutions Meter

PM5 – ME Mounting Bracket

When using the meter without a ground (Potential free) the conductive human body will interfere with the meter.  Use a non-conductive rod to create a distance of 3 to 5 feet.

Attach the PM5s mounting bracket to a non-conductive pole to aid with potential free measurements.

Compatible with the ME3030B, ME3830B, ME3840B, ME3851A, ME3951A EMF Meters.

  • A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields
  • Can easily be mounted to a non-conductive rod not included (e.g. wooden dowel, fiberglass rod)
  • Made of non-conductive material
  • Non-conductive screw with a convenient handle, specially designed for the use with the ME3030B, ME3830B, ME3840B, ME3851A, ME3951A EMF Meters


Know for sure what EMF levels you are being exposed to… Buy a Gigahertz Solutions Meter

PM5s – NFA Mounting Bracket

When using the meter without a ground (Potential free) the conductive human body will interfere with the meter. Use a non-conductive rod to create a distance of 3 to 5 feet.

Attach the PM5s mounting bracket to a non-conductive pole to aid with potential free measurements.

A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields

  • Can easily be mounted to a non-conductive rod not included (e.g. wooden dowel, fiberglass rod)
  • Made of non-conductive material
  • Non-conductive screw with a convenient handle, specially designed for the use with the NFA1000 and the NFA400
  • For highest precision please use the PM1

Know for sure what EMF levels you are being exposed to… Buy a Gigahertz Solutions Meter

Protective Cover – NFACover1

Protect Equipment Investments with a Flexible soft cover – Compatible with All NFA Series EMF Meters (Yellow in Colour).

Add Some Polish to Your EMF Tool Kit

The Protective Cover is Designed To:

  • Custom fit any NFA series Gigahertz Solutions Meter
  • Improve grip
  • Protect your EMF Meter from rough handling, bumps and minor drops


Made From Durable Silicone

  • Available in yellow
  • Supplied with the NFA1000


Know for Sure What EMF Levels you are Being Exposed to… Buy a Gigahertz Solutions Meter

Gigahertz Solutions Transport Case

  • Transport case with 2 shaped foam filler inserts for Gigahertz Solutions meters
  • Dimensions: approx. 33 x 27 x 8 cm
  • Fits one or two devices (with small antenna)

Attenuator 100x for HF35C

This attenuator allows the measurement of heavy exposures. Useful for making measurements close to sources of radio frequency emission, for example 10-100 meters from a cell tower or 1 meter from a wireless router or smartphone.

  • Suited for Gigahertz Solutions HF35C.
  • Attenuates the signal by a factor 100.
  • Increases the maximum range of the HF35C to 200.000 microwatts per square meter.

How to use

Mount the attenuator on the antenna input socket of the HF35C. Then connect the antenna cable to the attenuator. Multiply the measured value on the display by 100.